Printers / Pro Series

Pro Series wall printer

Vertical printing

Pro Series Package

$44,995complete printer package

The vertical printer built to travel. It breaks down into three hard cases with wheels, prints up to 11 feet high, and it is where new features from R&D land first.

  • Prints up to 11 feet high
  • Epson i3200 print head, 8 color channels
  • White ink standard
  • Three hard-shell travel cases with wheels
  • Up to five years of hardware warranty

Built to order, with a delivery date on your quote. Financing for qualified buyers. How financing works

Specifications

Pro Series specs

PrintsVertical surfaces: walls, glass, brick, block, wood and metal
Printed heightUp to 11 feet
Print headEpson i3200
Color channels8
Max resolutionUp to 2400 DPI
White inkStandard
Speed10 to 20 sq ft an hour, depending on resolution, surface and color channels
Control12.1 in onboard touchscreen
TravelThree hard-shell cases with wheels, standard
Setup and breakdownAbout 30 minutes
MaintenanceAbout 20 minutes every other day it runs. The pump box circulates the ink every 12 hours on its own.

Your printer, your training and your support, all from Wilmington, NC.

Up close

Inside the Pro Series

The parts that do the work, and what each one means once the printer is yours.

Pro Series print head carriage
Epson i3200 print headOne industrial print head with 3,200 nozzles across 8 color channels lays down CMYK and white. One head means one part to care for, and it lasts about two years with good care.
CMYK plus white ink on The Wall Printer
CMYK plus white inkWhite is standard, not an upgrade, so dark walls, concrete, glass, tile and brick print from day one. Print CMYK on light surfaces, or add a white layer for dark and textured ones. About 50 cents a square foot.
Pump box on The Wall Printer
Pump boxRuns print prep, cleaning cycles and test functions from the touchscreen. When the printer sits idle, it circulates the ink every 12 hours on its own power, so ink doesn’t settle in the lines.
12.1 inch touchscreen on The Wall Printer
12.1 inch touchscreenA Windows touchscreen computer on the printer. Load files, adjust settings, run test prints and control the pump box without a separate laptop.
Steel-reinforced belt drive on The Wall Printer
Steel-reinforced belt driveA steel-reinforced belt carries the print head up and down the rail instead of a chain, so it doesn’t build slack under the vertical load. Edges stay clean from the bottom of the wall to the top.
Standard or extended rail on The Wall Printer
Standard or extended railThe same base machine runs a standard rail for most walls or the extended rail for lobbies and feature walls up to 11 feet. Swap between jobs. About 15 feet of aluminum track comes standard, so one setup covers a full wall.

In your shop

Fill the gaps between wall jobs

The printer doesn’t need a wall to stay busy. Stand a panel upright in your shop and print canvas, aluminum, acrylic, tile, slate or cabinet doors. Shop work fills slow weeks, rainy days and the days between on-site jobs.

  • Steady workPieces you can print any day, not just when a wall is booked.
  • New customersSign shops, cabinet makers, tile and stone suppliers, artists and designers.
  • No site setupPrint in your own space and hand off finished pieces.
Rendering: a wall printer printing a beach sunset onto a large canvas panel in a print shopRendering
Canvas panelsA beach scene printed on a large canvas panel.
Rendering: a wall printer printing a wayfinding sign onto a brushed aluminum panelRendering
Aluminum signsWayfinding signs printed on brushed aluminum.
Rendering: a wall printer printing teal leaves onto a clear acrylic panelRendering
Acrylic panelsLeaves printed on clear acrylic.
Rendering: a wall printer printing a floral mural across white ceramic tilesRendering
Tile muralsA floral mural printed across ceramic tile.
Rendering: a wall printer printing a fern onto a slate panelRendering
Slate piecesA fern printed on natural slate.
Rendering: a wall printer printing botanical art across wood cabinet doorsRendering
Cabinet doorsBotanical art printed on wood cabinet doors.

Batch it: one setup, many pieces

Mount a row of blanks on a frame, lay out the file once and print them in one run. Sign plates, wood rounds, tiles and panels come off the frame ready to sell.

Rendering: a batch of brushed aluminum sign plates printed with room numbers and icons on a shop jigRendering
Sign platesRoom numbers and icons on brushed aluminum.
Rendering: a batch of birch wood rounds printed with mountain landscapes on a shop frameRendering
Wood roundsA set of landscapes on birch rounds.
Rendering: a batch of white ceramic tiles printed with blue and orange patterns in a frameRendering
Tile setsPatterned tiles, printed before they are installed.

These are renderings. Panels need to be held flat and upright while they print, and every new material gets a test print first. Ask the team how owners set up for shop work, or browse print ideas.

In the package

What comes with it

Training

One full day in Wilmington, NC, for your whole team. Recorded, and virtual is available.

Starter ink

Included. After that, ink runs about fifty cents a square foot.

RIP and layout software

No annual fee.

Customer care kit

Spare parts, included in every new printer package.

Lifetime support

From Wilmington, 9am to 8pm ET, seven days a week.

Warranty

Up to five years of hardware warranty.

Fit

Who the Pro Series fits

Owner-operators and crews who move the printer from job to job most days: storefronts, offices, gyms, restaurants and homes, often in the same week.

In their words

What owners say

I'd been looking at wall printers for about a year. Different companies, different price ranges. The reason we went with The Wall Printer was they're here in the States. Customer service is local, quick, and we can talk to people we can understand.
Terry B.Viking Designs & Graphics, Lubbock, TX
If you're price-oriented, if you're looking to get into this as cheaply as possible, you're going to have trade-offs. We spent more because we were going to get more.
Terry B.Viking Designs & Graphics, Lubbock, TX
There are two kinds of companies. One sells you a product and then you're on your own. I wanted a group of people in the background who were committed to my success as much as I was.
Jonathan O.WallPrint 904, Jacksonville and St. Augustine, FL

From recorded review calls with owners, September and October 2026. See their work.

In Jason's words

Pro or Tech?

"Both put very similar work on the surface. It's the way you get there. The Pro Series is the gigging keyboard. It breaks down into three hard cases with wheels and it's built to move from job to job. The Tech Series is the one that stays home."Jason Ott, Vice President of Business Development

Owner work

Work owners have printed

Pro Series printing a large mural on the extended rail
A golf course pond with herons printed as a break-through scene on an interior wall, with the vertical printer beside it
Colorful sports figures printed across the long wall of a gym
Colorful sports figures printed across the long wall of a gym
Open windows onto a beach, printed on an outdoor patio wall
Open windows onto a beach, printed on an outdoor patio wall
A black and white street scene printed across a wall beside a kitchen and dining table
A black and white street scene printed across a wall beside a kitchen and dining table
Teamwork makes the dream work lettering printed across closed window blinds
Teamwork makes the dream work lettering printed across closed window blinds
An elephant printed breaking out of a painted block wall
An elephant printed breaking out of a painted block wall

On video

See it at work

The Pro Series on a job
A Pro Series demo day print
Pro Series printers in the warehouse

Running costs

What it costs to run

Ink

About $160 a liter, about 50 cents a square foot printed.

Print head

About $2,000 to replace, and about two years with good care.

Software

No annual fee and no per-print fees.

Questions

What buyers ask

How tall does the Pro Series print?

Up to 11 feet high. Taller walls need a plan for the area above that, and the team will help you work it out.

What is the difference between the Pro and the Tech?

Both put very similar work on the surface. The Pro travels in three hard cases with wheels and gets new features first. The Tech stays in the shop and slides into the back of an SUV when it travels.

How fast does the Pro Series print?

10 to 20 square feet an hour, depending on resolution, surface and color channels. Setup and breakdown take about 30 minutes.

Can I finance the Pro Series?

Yes, for qualified buyers, subject to credit approval. Terms depend on the machine and the approval, so the real answer on payments comes after a short application.

Request a quote

Request a quote for the Pro Series

Tell us what you want to print and where. You will get a quote with a delivery date, and the team will answer anything about the Pro Series.

2157 Dexter St, Wilmington, NC 28403

We use what you send to answer you, and we never sell your information. Privacy policy