The 3D Floor Printer
Print your imagination on the floor.
The FUV Model Floor Painting Machine
The Floor Printer (“TFP”) is a unique full color digital printing system specifically designed to digital paint any graphics onto floor surfaces. TFP employs UV technology to print on multiple material floors including Wood floor, cement, ceramic tile, asphalt road, brick, lime,Epoxy resin etc. With the help of tracing system, the TFP can print on curved and uneven brick surfaces.
Width 2.3 meters; Length: No limited
W 30cm*H 89cm*L 270cm (Length can be extended)
Rack weight: 60kg; Chassis weight: 20kg;
Wheel structure, frame structure, 2 Stitching guide rails (1.4m+1.3m)
Epson 7th-Generation printhead
Type of Ink
LED UV curable ink. Cyan, Magenta, Yellow, Black, White.
2880Dpi: 1.5m2/h; 1440Dpi: 2.5m2/h ; 1080Dpi: 3m2/h ;720Dpi: 4m2 ; (If printing white color, the speed would be half of that)
Two Banner sensors will collect the data to the control system, and the printhead will automatically keep 1cm to the floor which can ensure the best distance for ink-jetting.
VSDT variable ink drop technology, high fault-tolerant feathering technology
Image Format Supports
JPG,TIFF, PNG, PDF.
RIP Software: MainTop (Pre-installed), SAi FlexiPrint (Optional)
Operating software: Chinese, English, French, Russian, Spanish, can be customized.
MainTop RIP: Chinese & English
SAi FlexiPrint RIP: English, Portuguese, French, Italian, German, Spanish, Chinese, Japanese, Korean, Dutch, Danish, Finnish, Russian
Yes, you can use the same file to continue printing where it stops
Yes, you should connect it with UPS battery extensional
Ink Consumption Per Square
Without printing white color: 20ml/m2
With printing white color: 40ml/m2
Nozzle Cleaning and Maintenance
Two Ways of Printing
Two sizes, from left to right printing, reverse also prints
Support: Quiet zone calibration, Step calibration, Jet force calibration